To increase the heat transfer from a wood burning stove fins are going to be attached to the metalchimney pipe. The fins will be 3 cm wide at the base and have a thickness of approximately2mm. The surface temperature of the pipe is 500C, and the surrounding air temperature isassumed to be a constant 25C. Select a suitable material for the fins and also justify anappropriate length. The material and length should be based an attempted to maximize heattransfer and minimize cost. Assume a reasonable value for the convection heat transfercoefficient.Finding will be presented in a report with a memo cover sheet. A narrative including anIntroduction, Analysis Methods, Results, and Conclusions needs to be provided.Introduction: Describe the problem and reason for the design.Analysis Methods: Describe the methods used to analyze the problem. Include equations usedand any other tools used.Results: Provide a dimensioned drawing of the design along with any results obtained fromcalculations or other analysis methods. Such as heat transfer rates, cost of materials andmanufacturing, and payback period.Conclusions: Provide a summary of the problem, analysis, and results. Lastly discuss themethod used to manufacture and attach the fins.Notes:The report must be created in a word processing program.All drawings must be created with a computer aided drafting program.